Reamping made easy. The Radial X-Amp-500 allows you to pre-record a dry guitar signal then feed up to two amplifiers simultaneously using the convenient 1/4 guitar-level outputs on the front panel. When you want to retain the natural and dynamic feel of a live track but also want the versatility to alter the timbre reamping is your best friend. The X-Amp-500 boasts simple plug and play operation and allows you to take advantage of the built-in features of your existing 500 Series rack system. When used with the Workhorse rack you have instant access to the OmniPort input which acts as a hi-Z guitar input for the X-Amp allowing you to record dry guitar signals or distribute the signal to your amplifiers. The X-Amp buffers and unbalances your signal allowing you to feed amps up to 50 feet away without signal loss. The Radial X-Amp-500 is the perfect tool for achieving incredible tone without the hassle of re-recording guitar parts over and over again. Scenarios and Applications Recording a Dry Track: The X-Amp 500 allows you to use Radials proprietary OmniPort input when used with the Workhorse 500 Series rack system. This input is configured to be used as a Hi-Z guitar input for the X-Amp 500. Plug your guitar into the OmniPort input and feed guitar amps using the front panel 1/4 outputs whilst sending the dry guitar signal from the XLR output connector on the back of your Workhorse into your DAW. Reamping: You can take the pre-recorded dry track you recorded through the X-Amp or any other recording setup and send it to your X-Amp 500 via the XLR input on your 500 Series rack. The signal can be fed from Out-1 and Out-2 to your guitar amps so you can mic up the amplifiers and record them for new tonal and creative possibilities with the same feel and response as if the guitarist was right there. Using the X-Amp as a Distributor: Simply connect your guitar to the OmniPort on your Workhorse 500 Series rack system and you can then send your guitar signal out to two amplifiers using Out-1 and Out-2 up to 50 feet away. Reviews “The X-Amp makes everything easy flawless and super clean when routing recorded signals to actual amplifiers positioned in nice rooms and captured by good mics. Yum. The dual outputs even let me transform a boring mono guitar track into a layered and sexy wide-stereo sound through two different amps.” – GuitarPlayer Magazine – Workhorse and X-Amp Review. “The X-Amp is Radials best known and most popular reamplification device. The biggest difference is that it is an active device and capable of driving a pair of amps at one time. It is easy to use and sounds like the real thing.” – Recording Magazine – X-Amp 500 Review. “Radial shows that the 500 series concept doesnt have to be limited to processors like EQ or compressors. These specialty devices are designed for a wide range of tasks.” – electronicMUSICIAN – Workhorse 500 Series Review. “The X-Amp is a Reamp box that allows you to send recorded DI signal back to two separate amplifiers simultaneously. Clean Reamping and useful splitter functions.” – Resolution Magazine – Radial 500 Series and X-Amp Review. Features 500 Series professional Reamping interface Can be used for recording dry guitar signals or as a signal distributor Balanced XLR line-level input on the rear panel of your 500 Series can be used to feed the module The X-Amp unbalances and buffers the pre-recorded signal before feeding two transformer-isolated hi-Z guitar-level outputs Front-panel 1/4 jacks allow for convenient desk-top use and feature ground lifts for eliminating the hum and buzz caused by ground loops Independent level controls allow you to adjust the drive from each 1/4 output for optimized tone 180° switch allows you to keep both outputs and amplifiers in phase 100 percent discrete class-A circuitry for the highest audio fidelity Each 1/4 output can be individually muted using independent switches Radials legendary build quality and performance Specifications Audio Circuit Type: Class-A discrete transformer-coupled Frequency Response: 20Hz – 20kHz (adjusted for guitar signals -5dB at 20kHz) with 100K Ohm load Total Harmonic Distortion: <0.002 percent at 0dBu (20Hz – 20kHz) Intermodulation Distortion: <0.04 percent at 0dBu input Input Impedance: 1.2K Ohms (XLR) Output Impedance: 600 Ohms (XLR) Noise: -114dB below 0dBu Maximum Input: +26dBu Voltage Gain: XLR to XLR: 0dB (+/-0.5dB) Omniport to XLR: -3dB (+/-0.5dB) XLR to 1/4: -0.6dB (+/-0.5dB) Data Compression: 40mA +/-16VDC Input Connectors: XLR Output Connectors: XLR 1/4 Extra Connectors: OmniPort (configured as Hi-Z guitar input) Conditions: For use in dry locations only between 5°C and 40°C Format: Standard 500-Series rack format