Achieve pro-level results today. The MOTU 4Pre Hybrid Audio Interface will take your mixes and productions to new heights. Compromised of four inputs this compact interface provides you with all the necessary tools to capture detailed recordings of single instruments as well as small ensemble recordings. From the stage to the studio theres no task too grand for the 4Pre. The inclusion of a removable lightweight aluminum alloy chassis ensures it will withstand the vigors of extended use whilst still looking and sounding as fresh as the day it left the factory. The hands-on nature of the interface allows you to quickly achieve the perfect balance of levels by manipulating the volume control for each channel. This can all be monitored via the handy LED screen. Make your greatest records to date thanks to MOTU! The finest preamps From drums to strings and pianos to vocals. Its hard to make bad recordings when youve got MOTU preamps in your set-up. These studio-grade preamps guarantee crystal clear transparent reproduction of virtually any instrument or voice. Their low-noise floor and extensive dynamic range makes every source sound wholly natural. So much so that upon later playback youll be forgiven for forgetting that youre not in the same room as the artist! The worlds greatest studio in your backpack Thanks to the wide range of connectivity the 4Pre can easily connect to any Mac or PC operating system for 96kHz recording possibilities. This lets you turn your computer into a fully-functioning recording studio wherever you desire! The combi-jack inputs enables you to record both microphone and line-level signals from synths and keyboards. Whilst the “Hi-Z” inputs are designed with the correct impedance to allow you to directly connect your guitar or bass without needing an amplifier or cabinet. Should you desire this signal can be re-amped at a later date by utilising the on-board line outputs. Optimised protection at all times Just like every MOTU interface the 4Pre comes complete with a durable lightweight aluminum alloy chassis. This is perfect for enduring the vigors of live performance and continued use. Thanks to this premium exterior your interface will look and sound as fresh as the day it left the factory! Features Features two headphone output with independent volume controls Send signal directly to your speakers via the stereo main outs Combo-jack inputs allow you to connect microphone and line-level sources Create four separate mixes to suit the wants and needs of each performer Offers hybrid FireWire/USB 2.0 connectivity Specifications Converters: 24-bit Sample Rates: 44.1 48 88.2 96kHz Analog In: 4 x XLR/TRS combo 2 x 1/4″ TRS (balanced/unbalanced) 2 x 1/4″ hi-Z guitar Analog Outputs: 2 x 1/4″ balanced TRS main out 2 x 1/4″ balanced TRS line out 2 x 1/4″ TRS headphone Digital Input: 1 x RCA coaxial S/PDIF Digital Output: 1 x RCA coaxial S/PDIF Computer I/O: 1 x FireWire 400 (Type B) 1 x USB 2.0 Sync In/Out: S/PDIF SMPTE time code: (LTC) Headphone Output: 2 x 1/4″ TRS phone with independent volume control Phantom Power: Individual +48V Front panel: 2 x 10-segment ladder LEDs (main outs) 4 x 5-segment LEDs (inputs) 2 x signal present LEDs (S/PDIF I/O) 2 x signal present LEDs (stereo line out) 4 x LEDs (48V phantom power) 4 x LEDs (-20 dB pad) 5 x LEDs (main line S/PDIF phone trim) 1 x LED (Vol/Pan) Power Requirements: 9-18V DC 5W or FireWire bus power Product Code: MOTU-4PRE