The Laney Digbeth DB500H is the new standard of bass amplification. Modern functionality is paired with vintage expectations creating an amp that is powerful and compact. The DB500H comes packed with a multitude of features that ensure a clear tone wide dynamic range and powerful punch which is ready to blow the crowds away. Sculpt your sound using either the 3 band EQ or TILT EQ function. You can elevate the high end providing your bass with presence or bring out the bass making the bottom end boom. With an FX loop to keep your effects clear this amp is built to help you create your perfect performance. It is already a modern classic. A selection of tones Complete tonal freedom. Packing 500 Watts RMS power this amp will emit your basslines at an earth-shattering amplitude. But when it comes to your performance it’s about a lot more than volume. The Laney Digbeth DB500H Bass Head is packed full of features to enhance your sound. Featuring both a FET & Tube channel you can change between the two tones at the flick of a switch. These two channels can also be blended – pulling out the tube volume dial lets you season the FET tone with a bit of grit and distortion. The tonal exploration doesn’t stop there. A 3-band EQ is paired with a Tilt Seesaw EQ which can be used to create the perfect sound for your performance. Turning the Tilt dial towards the treble clef boosts the higher frequencies whilst dampening the lower end giving the tone a cutting edge so you can cut through a live sound. Alternatively you can use the Tilt EQ to boost the Low frequencies generating a thick round tone. All of this can be finely tuned with the designated bass and treble dials to give either register an extra boost. This is all topped off with a mid-level dial so you have full control of the mid-range. Stay connected Connecting your devices has never been easier than it is with the Laney Digbeth DB500H. In addition to the traditional 1/4-inch input jack there are a multitude of different connectivity options. An FX loop located on the back of the head allows you to add effects in between the pre-amp and the output. So you can experience delayed distortion as opposed to distorted delay. Practice with simplicity and record with ease. A designated XLR-DI output allows you to connect the amplifier to a PA system or recording interface without needing to mic up the amp. This is partnered with a ground lift switch removing any unwanted hum in the mix. When it comes to practising a 3.5mm stereo aux in and 3.5mm phones out both of which have level controls let you jam along to your favourite tunes whilst avoiding any noise complaints. Specifications Product: BASS Amplifier Power: 500 Watts RMS Channels: FET & TUBE Unit Size/mm: 205x420x220 (HxWxD) Unit Weight: 7.1 Kg Carton Size/mm: 280x585x310 (HxWxD) Packed Weight: 11 Kg Mains Voltage: 100-240V Universal power supply Power Consumption: 150W Product Code: DB500H:U:DL