The Fostex 6301NX Powered Monitor (Single) 20W Amp 4 Inch XLR is a compact and powerful speaker with energy-saving auto standby functionality. Ideal for any situation where immaculate audio fidelity and accurate monitoring is needed the Fostex 6301NX has found itself at the forefront of broadcast and production studios around the world. Housed in a mountable die-cast aluminium enclosure with non-protruding buttons on a flat-panel design the Fostex 6301NX is ideal for space-saving studio environments. Punching well above its size the Fostex 6301NX features exceptional audio clarity and fidelity. Optimised for peak audio performance the newly-designed 20W Class-D amplifier and 4-inch cone can drive up to 98dB SPL without breaking a sweat. Even at these high levels the 6301NX Powered Monitor produces no unwanted distortion or artefacts keeping your sound crystal clear for accurate monitoring. Featuring both TRS and transformer balanced XLR inputs the Fostex 6301NX can adapt to virtually any studio or broadcast environment seamlessly integrating with your existing setup for exceptional audio quality when it matters most. Historic legacy A part of the market since 1982 the Fostex 6301NX has ascended to the industry standard within broadcast and production houses. The compact design powerful and neutral sound coupled with the easily mounted frame make the 6301NX the obvious choice for backstage production suites. Of course this doesnt mean that they are limited in their suitability. The newly designed Class-D power amp can drive up to 20W per speaker and is matched with a dedicated 4″ driver to deliver a wide frequency response from 70Hz – 15kHz with stunning accuracy making it ideal for musicians and producers in the studio. Flexible inputs between the XLR and 1/4″ TRS inputs allow you to connect a wide range of sources from your mixing desk to audio interface integrating with any setup. Optimised audio performance Conscious of packing a huge amount of punch into the size the Fostex 6301NX boasts excellent audio performance throughout. Ideal for use in any situation where careful audio analysis is needed the 6301NX Powered Monitor is capable of delivering pristine audio quality for accurate monitoring of your music and sound. The 20W Class-D amplifier has been designed to deliver a huge punch of up to a maximum of 98dB SPL whilst remaining virtually silent. When driven to high levels the 6301NX will remain clear and crisp not suffering from any audible distortion with a THD rating of 0.05 at 1kHz with a residual noise level of -70dBV ensuring your audio doesnt suffer from any unwanted artefacts for accurate monitoring. Features20W D-class power amplifier for higher output level and less power consumption with no heat sink Dedicated 4-inch full range driver for clear audio reproduction Traditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series Flat panel design to avoid inadvertent power-off or level change Auto Stand-by mode (compliant to ErP directive) for energy saving Detachable IEC type power inlet with multi-voltage power handlingSpecifications Speaker SectionEnclosure type: Closed Unit: 4″ full range Frequency response: 70 Hz – 15k Hz Sound pressure level: 85dB / W (1m) Maximum SPL: 98dBAmplifier SectionInput:Connector: 1/4″ TS Phone (unbalanced) Connector: XLR-3-31 (transformer balanced)Input impedance: 10k ohm or more Rated uutput: 20W Distortion (T.H.D.): 0.05 (1kHz / 1W output) Residual Noise: -70dBV or less Input sensitivity: 1/4″ TS phone: -14dBV (0.2Vr.m.s.) XLR: +4dBu (1.2Vr.m.s.)Auto Stand-by: Active after approx. 25 min. of continuous input lower than the threshold levelGeneral:Dimensions (H x W x D): 120 x 189 x 120mm Weight: 2.2kgs Power requirement: AC 100 – 240V (50/60Hz) Power consumption: 10W (less than 0.5W in stand-by mode) Product code: FX-6301N/X