Freedom on stage. Performance the way its meant to be. Give your audiences the show they deserve with an Electro-Voice RE3-BPNID Bodypack Wireless Set with No Input. Youll get the best possible sound. Audiences wont be able to tell the difference from a wired connection but for performers the freedom will be unmissable. Audiences and performers will both feel the benefit of a great live show. No input device is included so you can use your own favourite compatible lavalier mic headworn mic or compatible cable. Easy set up simple connection Component synchronisation is just seconds away. All you need to do is use the included sync function on the transmitter and receiver and youll be ready to perform in seconds. Cut down on set up times and get straight to your performance. You can even check what frequencies are available in your environment with the receivers channel scan function. Never be held back by a busy wireless environment again. This is ideal if you need to use more than one wireless set in the same frequency band without interference or at locations such as festivals where many people might be using a wireless set. Features Frequency scanning lets you ensure there are free frequencies Sync function lets you connect transmitter and receiver in seconds Robust construction throughout with metal bodies throughout Two frequency bands in one system – great if you need a license or license free Whats in the box? RE3-BPT Bodypack Transmitter RE3-RX Diversity Receiver Two receiver antennas Universal power supply Two AA batteries Receiver rack mounting hardware Owner’s manual Documentation packet Specifications RE3-RX RE3 receiver Frequency oscillation mode: Phase-locked loop (PLL) Sync frequency: Ultrasonic 40 kHz Diversity: Antenna diversity Bandwidth: 36MHz Signal/Noise ratio: >100dB(A) Total harmonic distortion(Thd): <0.6% at 1kHz Receiving sensitivity: -81dBm for -12dB SINAD Frequency response: 63Hz 16kHz±2dB (BPT) 51Hz 16kHz±2dB (HHT) Antenna type: Detachable 1/2 wave with BNC connector Antenna booster power: DC12 – 15V/100mA Function display by: LCD Control functions: Power scan frequency group channel squelch TX sensitivity TX attenuation TX RF power TX auto off TX key lock TX display info TX sync configuration RX output volume RX output level RX antenna booster power RX key lock RX display contrast RX display brightness RX system reset. Sync data options: Frequency group channel sensitivity level attenuation status RF power auto off status key lock status transmitter display (freq or Gp/Ch) Audio frequency output impedance: 240Ω (unbalanced) 1400Ω (balanced) Squelch and noise muting: Noise muting and tone code locking Output ports: 1 x balanced XLRM jack 1 x unbalanced 1/4” TS (6.3mm) jack Power supply: DC12 15V/500mA Finish: Black polyurethane paint Dimensions: 47 mm x 210 mm x 175 mm Net weight: 1.23 kg Gross weight: 1.49 kg RE3-BPT-8M Bodypack transmitter Frequency oscillation mode: Phase-locked loop (PLL) Sync frequency: Ultrasonic RF power output: 10mW Display by: LCD + LED Function controls: Power mute group channel frequency sensitivity adjustment input level attenuation RF power auto off key lock. RF stability: <±10kHz at Fc Modulation frequency shift: Wideband FM ±48kHz deviation Harmonic radiation: <-50dBc Input jack: 4-pin mini jack Battery: 2 x AA alkaline battery or NiMH rechargeable battery Charging contacts: Yes Finish: Black polyurethane paint Dimensions (without antenna): 81.5mm x 64.5mm x 25mm Net weight: 0.174 kg Gross weight: 0.235 kg