More than a mere mixer. The Dynacord PowerMate 600-3 8-Channel Powered Mixer is revolutionary. It houses a USB interface PA effects processor and graphic EQ into a compact intuitive design. Ideal for any application. The PowerMate 600-3 is versatile enough to undertake any task you throw at it making it sound larger than life. Two DSP processors provide you with 100 high-quality presets to take your mixes and performances to the next level.For monitoring there are six AUX buses two switchable from pre to post fader resulting in hugely flexible monitoring possibilities. Once the mix is how you like it all it takes is a couple of cables to project it to passive speakers and record into your DAW. Be confident to take on anything thanks to the Dynacord PowerMate 600-3 High-performance power amplifier Taking full advantage of Class-D amplifier technology the 600-3 delivers audio quality of the highest grade. The mixer provides an RMS output of 2 x 1000-watts into 4Ω and generates a small amount of heat for a safe reliable performance. The power supply is monitored by a microprocessor-controlled switching power supply to save weight and can be used anywhere in the world thanks to the universal automatic mains switching. Premium channel features There are 4 mic/line level channels available onboard the PowerMate 600-3 and each input features a variety of professional features for a smooth performance. The XLR microphone inputs provide an almost silent operation with extremely low noise low-hum and incredibly low distortion for low impedance microphones. Condenser microphone can be used thanks to the inclusion of centrally switchable phantom power. These channels are all adjustable with gain control switchable 80Hz low-cut filter and an intuitive 3-band EQ for excellent sound shaping abilities. Additionally there is an FX send AUX send Monitor send and panorama and balance controls. Channels 5-6 and 7-8 are also available through USB inserts in 1-2 and 3-4. The stereo line channels on 9-10 and 11-12 provide users with electronically balanced jack inputs to allow connection of electronic instruments such as keyboards drum-machines guitars and bass guitars or even additional hardware such as mixers. Users can also connect a CD or MP3 player via the RCA inputs. Each input channel includes a signal/peak LED for simple motioning and there is an efficient mute and PFL button available for use. Professional audio interface Presented in 24-bit resolution the digital interface supports sampling rates up to 96kHz for a professional level performance and supplies 2 stereo channels. Available for input and output use at the same time the USB sends include master L and R with AUX and MON signals. 4 channels can be sent in either direction through the USB port on your PC or Mac and setup is easy with the inclusion of a DVD with Cubase LE and USB drivers. Flexible effect processing With 2 x independent 24-bit stereo effects processors sound engineers can easily mix multiple sounds together with FX 1 and FX 2. Both sections provide 100 presets including studio-grade reverb delay and modulation effects. The delay time within the delay effect can be matched to the beat of the music using a tap key and similar effects can also be created and stored with 20 user memories available. Optimal speaker protection The PowerMate menu allows users to set matching continuous power output levels to any connected loudspeaker for a safe and reliable performance. Damage caused by thermal overload within the loudspeaker can be avoided via dynamic limiting of the maximum output power without effecting the dynamic range. The protection component constantly monitors the energy supplied to the loudspeakers in order to limit the levels when there is a danger of overloading. Features Compact powered mixer 2000W total output power Lightweight housing Intuitively operated mixing section 2 editable digital effects devices with 100 presets each 20 user memory effects Professional 4 x in / 4 x out digital interface Stereo equaliser in master section Large OLED display Class-D amplifier with 2 x 1000W RMS into 4Ω Specifications Channels (Mono and Stereo): 4 and 4 Microphone Inputs: 6 x XLR Auxiliaries (FX AUX): 1 Pre 1 Post 1 Pre/Post Switchable Power Amp Max Output Voltage: 74V RMS Max Single Channel Output Power Dynamic-Headroom IHF-A At 2.66Ω: 2 x 1600W At 4Ω: 2 x 1250W At 8Ω: 2 x 675W Max Single Channel Output Power Continuous 1kHz At 2.66Ω: 2 x 1350W At 4Ω: 2 x 1150W At 8Ω: 2 x 650W Maximum Midband Output Power At 2.66Ω: 2 x 1350W At 4Ω: 2 x 1000W At 8Ω: 2 x 600W Rated Output Power At 4Ω: 2 x 900W At 8Ω: 2 x 450W THD At 1kHz Mic Input To Master A L/R Outputs +16 dBu Typical: Power Amp Inputs To Speaker L/R Outputs: DIM 30 Power Amplifier: IMD-SMPTE Power Amplifier: Frequency Response -3 dB Any Input To Any Mixer Output: 15Hz – 70kHz Any Input To Speaker Output: 20Hz – 30kHz Crosstalk 1kHz Amplifier L/R: Channel to Channel: Mute and Standby Switch Attenuation: >100 dB Fader and FX/AUX/MON-Send Attenuation: >85 dB CMRR MIC Input: >80 dB Input Sensitivity Mic: -74 dBu Line (Mono): -54 dBu Line (Stereo): -34 dBu CD (Stereo): -34 dBu Power Amp Inputs: +8 dBu Maximum Level Mixing Desk Mic Inputs: +11 dBu Mono Line Inputs: +31 dBu Stereo Line Inputs: +31 dBu All Other Inputs: +22 dBu All Other Outputs: +22 dBu Input Impedance Mic: 2kΩ CD In: 10kΩ All Other Inputs: >15kΩ Output Impedance Phones: 47Ω All Other Outputs (Balanced/Unbalanced): 150Ω / 75Ω Equivalent Input Noise Mic Input A-Weighted 150Ω: -130 dBu Noise Channel Inputs to Master A L/R Outputs A-Weighted Master Fader Down: -100 dBu Master Fader 0 dB Channel Fader Down: -92 dBu Master Fader 0 dB Channel Fader 0 dB Channel Gain Unity: -82 dBu Signal/Noise Ratio: 105 dB Output Stage Topology: Class D Equalisation LO Shelving: ±15 dB / 60Hz MID Peaking: ±12 dB / 2.4kHz HI Shelving: ±15 dB / 12kHz Master EQ 9-Band: ±10 dB / Q = 1.5 to 2.5 Filter Lo-Cut Mono Inputs: F = 80Hz 18 dB/oct. Switchable Speaker Processing: LPN Switchable Effects Type: 2 x Stereo 24/48-Bit Multi Effects Processors Effects Presets: 100 Factory and 20 User Tap-Delay Remote Control: Footswitch MIDI Display: 128 x 64 Pixels OLED Digital Audio Interface Channels: 4 In / 4 Out AD/DA Conversion: 24-Bit Sampling Rate: 44.1 / 48 / 88.2 / 96kHz PC Interface: USB 2.0 Female Type B Peak Display: 6 dB Before Clip MIDI Interface: 5-Pin DIN Connector In / Out Output Power Control (Speaker Protection): Adjustable Longterm RMS Limiter Protection Mixer Outputs Relay Controlled: AUX Mon Master A L/R Amplifier: Audio Limiters High Temperature DC HF Short Circuit Peak Current Limiters Turn-On Delay Back EMF Switching Mode Power Supply: Inrush Current Limiters Mains Over/Undervoltage Mains Over Current High Temperature Phantom Power Switchable: 48V DC Power Consumption: 450W Weight: 9.5 kg Dimensions Height: 161.7 mm Width: 438.8 mm Depth: 362.5 mm Product Code: POWERMATE 600-3