Designed for critical home/project/professional studio applications and live performance this side-address cardioid studio condenser delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad the AT2035 handles high sound pressure levels with ease. Along with its rugged construction and high-performance specifications the AT2035 provides an exceptional level of consistency from model to model. It comes equipped with a protective pouch and a custom shock mount. Bundle Includes AT2035 Microphone Boom Microphone Stand Pop Shield XLR – XLR Cable Large diaphragm for smooth natural sound and low noise High SPL handling and wide dynamic range provide unmatched versatility Custom shock mount provides superior isolation Switchable 80 Hz high-pass filter and 10 dB pad Cardioid polar pattern reduces pickup of sounds from the sides and rear improving isolation of desired sound source Includes custom shock mount & protective pouch Specifications ELEMENT: Fixed-charge back plate permanently polarized condenser POLAR PATTERN: Cardioid FREQUENCY RESPONSE: 20-20000 Hz LOW FREQUENCY ROLL-OFF: 80 Hz 12 dB/octave OPEN CIRCUIT SENSITIVITY: -33 dB (22.4 mV) re 1V at 1 Pa IMPEDANCE: 120 ohms MAXIMUM INPUT SOUND LEVEL: 148 dB SPL 1 kHz at 1 T.H.D.; 158 dB SPL with 10 dB pad (nominal) NOISE: 12 dB SPL DYNAMIC RANGE (typical): 136 dB 1 kHz at Max SPL SIGNAL-TO-NOISE RATIO: 82 dB 1 kHz at 1 Pa PHANTOM POWER REQUIREMENTS: 11-52V DC 3.8 mA typical SWITCHES Flat roll-off; 10 dB pad (nominal) WEIGHT: 403 g (14.2 oz) DIMENSIONS: 170.0 mm (6.69″) long 52.0 mm (2.05″) maximum body diameter OUTPUT CONNECTOR: Integral 3-pin XLRM-type ACCESSORIES FURNISHED: AT8458 shock mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch Microphone Pop Filter Shield for Mic Stand Stops damaging noises from p and b sounds Protects your mic Flexible gooseneck holder Swivel mount for easy positioning