The Art ISO-8U Power Supply is a high-performance 9v – 12v selectable power supply for your pedals. Featuring eight outputs that are individually isolated the ISO-8U allows you to power your equipment with peace of mind knowing you will not run into ground looping issues that can cause distracting feedback and hum. Uniquely featuring a variable voltage meter on output 1 the ISO can create sagging effects with your pedals to simulate the sound and response of a dying battery in your pedal. This creates a fantastically unique sound that brings your pedals to clipping earlier due to the lower headroom. Send your distortion pedals into fuzz territory and compress your signal to give you that little bit extra when you need it. Designed to handle most pedals each output can provide up to 100mA with two high-powered outputs delivering 250mA for those power-hungry pedals. In order to protect your equipment from harm or damage the outputs are protected by current limiting with a handy LED indicator for faults. Ultra clean power The ISO-8U has been designed to offer incredible amounts of power as clean and with as little noise as possible. Using advance technology the Zuma offers eight individually isolated outputs that feature dedicated isolations to achieve ultra-low-noise and optimum performance. Each of the outputs offer 100mA of power to ensure that the ISO-8U can handle even the most power hungry pedals. Totally isolated outputs With most digital pedals requiring an isolated power source the Art ISO-8U is designed with each output isolated from one another. This construction allows the power supply to deliver pure clean noise free operation for the pedal. An additional layer of pure analogue regulation takes advantage of the analogue circuits to provide a suppression of in-band audio noise eliminating any hints of noise to create the ultimate clean power supply. Unique sagging feature The Art ISO-8U features a unique feature that sets it apart from the rest. The ability to dial down the voltage of output 1 from 9v – 4v. This allows you to simulate the sound of a battery losing power giving you a sagging effect and less headroom and breaks up your sound quicker. This can give you some fuzzy and extra distorted sound if running a pedal such as an electric guitar distortion pedal through where the signal gets more and more distorted the more you adjust the voltage down. FeaturesEight fully isolated DC outputs One output is adjustable from 4-9v to simulate a battery losing power to have less headroom for quicker breakup of your signal Supplied with all the adapter cords needed Cable tie slots for cable management Switchable voltage per output Chargable with USB power for high speed charging Runs from universal power supplySpecificationInput Connections: 12v/2.5A Universal Output Connections: 2.1mm x 5.1mm barrel connection negative tip Max output current Out:1-6: 100mA Out 7 8: 250mACables provided:6 x 24 inch 5.1mm – 5.1 mm 2 x 24 inch right angle 5.1 mm – 5.1 mm 1 x Battery clip – 5.1 mm 1 x Polarity reverse 5.1 mm – 5.1 mm 1 x Y split 5.1 mm cable 1 x 3.5mm – 5.1mmUSB output: 10 Watts Maximum External power required: 100-240V AC / 50-60Hz Dimensions (H x W x D): 34mm x 177 mm x 84 mm Weight: 0.59kg Product code: ART-ISO-8UE4